Carbon dioxide incubator is divided into gas jacketed heating and water jacketed heating. Both heating systems are accurate and reliable, and they all have their own advantages and disadvantages. Water jacket heating maintains a constant temperature by enclosing an internal tank through a separate water jacket. The advantage is that water is a good thermal insulation material. When a power failure occurs, the water jacket system can Keeping the temperature accuracy and stability in the incubator for a long time is beneficial to users who are not stable in the experimental environment and need to maintain stable culture conditions for a long time. The gas-sleeve heating is to directly heat the inner tank through the heaters in the gas jacket of the tank, and is also called direct heating on six sides. Compared with the water jacket type, the gas-sleeve type has the characteristics of quick heating and rapid recovery of the water-type incubator, which is particularly advantageous for short-term cultivation and the need for frequent switching of the door. In addition, the air-sleeve design is simpler for the user than the water jacket.
Maintaining a constant temperature in the CO2 incubator is an important factor in maintaining healthy cell growth, so an accurate and reliable temperature control system is an integral part of the incubator. In order to make the incubator work more stably, we recommend that users choose a carbon dioxide incubator with independent triple temperature control functions, namely temperature control inside the box, over temperature alarm control and ambient temperature monitoring.
Precautions for use 1. Close the door of the incubator to prevent gas leakage and affect the test results;
2. After the refrigeration system stops working, wipe the working chamber and the glass observation window with a soft cloth;
3. Before each stop, each control switch should be in the non-working state to cut off the power;
4. The carbon dioxide incubator should be placed on a flat surface, and the environment should be clean and tidy, dry and ventilated;
5. Do not adjust the pressure of the inflowing gas to an excessive level to avoid breaking the pipeline and damaging the detector;
6. Before using the instrument, each control switch should be in non-working state, and the speed control knob should be placed in the minimum position;
7. Proper use and attention to the maintenance of the instrument, so that it is in good working condition, can extend the life of the instrument;
8. Not applicable to the cultivation of articles containing volatile chemical solvents, low concentrations of explosive gases and low ignition gases, and toxic substances.
9. Keep the air in the incubator clean and disinfect regularly; always pay attention to the amount of distilled water in the distillation tank to keep the relative humidity inside the tank while avoiding evaporation of the culture solution;
10. During continuous operation, the instrument should be inspected regularly every three months; check for water droplets, dirt, etc. falling into the motor and exposed refrigeration components; clean the compressor, the dust and dirt on the condenser; Fuse, control element and fastening screw;
Shanghai Xinzhuang strives for survival by quality, development by technology, efficiency by management, reputation by service, welcome new and old customers!
Telescopic Ladder- Single Side Telescopic Ladder
Easy to extend and fold Aluminum Ladder - Telescopic Ladder with the great reputation over the different countries because of it`s lightweight and portable aluminum design.It conforms to EN131.
When the Telescopic ladder be folded , you need to press buttons on each rungs and close to step by step..The max load of Telescopic ladder is 150KGS. You can climb to roof or loft .You also need it to clean the windows , or decorating etc . The most feature is the the telescopic ladder is very compact to storage, no more space won`t be taken .
Choose the telescopic ladder without hesitation as it would be the most convenient assistant for your life . 2.m/2.6/2.9/3.2/3.8/4.1/4.4/4.9/5/5.6m.
More details as follows :
![H8I]Z[L]A)Z9QOOOP4[BHBO](http://i.bosscdn.com/product/91/43/d1/23f8378b109f43f7f5829d15b1.jpg "H8I]Z[L]A)Z9QOOOP4[BHBO")
FAQ:
Q: Are you factory or trading company ?
A: We are factory , exported foreign over decade with rich experiences .
Q: We can change the color of the rubber cover ?
A: yes , the regular is black , you also choose other color .
Q:What`s the MOQ ?
A: 50 PCS.
Q: Can I have a sample ?
A: It`s ok .
Q:What`s your price ?
A: It`s depends on your demands, quantity , we can offer you lowest price .
Q:What`s your delivery time ?
A: Sample order : 3days , bulk order : 23-25days .
Q: Can we use our logo or brand on the package ?
A: yes , OEM is ok .
Q: What`s the payment :
A: (1) T/T: 30% deposit be paid in advance , the 70% of total payment see the copy of B/L.
(2) L/C it`s ok .
(3) Cash also ok .
More inquires or questions , plz feel free to contact us !
Welcome to visit our factory !
Telescopic Ladder
Telescopic Ladder,Aluminum Telescopic Ladder,Single Side Telescopic Ladder,Double Side Telescopic Ladder
Yongkang Aoyi Industry&Trade Co., Ltd. , https://www.aoyiladder.com