For the technical indicators of Shanghai Xinzhuang Biological Safety Cabinet, please refer to the following indicators:
1. The speed at which the position air enters the biosafety cabinet through the front opening is approximately 0.45 m/s. Directional airflow at such speeds is highly susceptible to interference, including airflow from personnel approaching the biosafety cabinet, opening windows, air supply system adjustments, and opening and closing doors.
Therefore, it is desirable that the biosafety cabinet be located in a place where personnel activities, items flow, and where airflow may be disturbed. Keep as much as 30 cm of space behind the safety cabinet and on each side to take advantage of the maintenance of the safety cabinet. A space of 30-35 cm should be left on the top of the safety cabinet to accurately measure the speed of the air passing through the exhaust filter and to facilitate the replacement of the exhaust filter.
2. If the operator's biosafety cabinet is used improperly, its protective effect may be greatly affected. Operators need to be careful to maintain the integrity of the airflow in the front opening as they move in and out of the safety cabinet. The arms should move vertically in and out of the front opening.
The hand and arms are extended into the biosafety cabinet for about one minute, so that the safety cabinet can be adjusted and the air inside can be swept over the surface of the hands and arms before the item can be processed. Place all necessary items in the safety cabinet before starting the experiment to minimize the number of times your arms enter and exit the front opening.
3. Item placement The air intake grille on the front of the secondary biosafety cabinet cannot be blocked by paper, equipment or other items. Items placed in the safety cabinet should use 70% alcohol to eliminate surface contamination. Experiments can be performed on a towel soaked with disinfectant to absorb droplets that may be spilled. All items should be placed as close as possible to the edge of the workbench at the back of the workbench and will not block the alternate grille during operation. Equipment that produces aerosols (such as mixers, centrifuges, etc.) should be placed close to the rear of the cabinet. Large-volume items such as biohazard waste bags, trays containing discarded straws, and suction filters should be placed on one side of the cabinet. The experimental operation on the work surface should be in the direction from the clean area to the contaminated area.
The autoclavable biohazard waste bags and the suction cups should not be placed outside the safety cabinet. Otherwise, the arms must frequently enter and exit the safety cabinet when using these items, which will interfere with the integrity of the air barrier of the safety cabinet. This affects the protection of people and items.
Shanghai Xinzhuang Instrument Co., Ltd. is an instrument manufacturing company that integrates R&D and sales. We adhere to the principle of quality first, serve the society and serve the people!
The oiled printing machine is the representative work of environmental protection tendency, which makes the VOC volatilization of the open ink transfer printing machine reduced by 95%. In Europe, the mainstream market is dominated by the printing machine, the open printing machine is only in eastern Europe, the cis countries have a certain distribution. In the long run, the oil-cup printing machine will spread to Asia, America, and Africa, and will be popularized in some large enterprises. However, the printing speed of the printing machine is challenging, it is difficult to manufacture, and the friction resistance of the oil cup and steel plate is a thorny problem. To explore from a perspective of printing pad printing machine, the cleaning device is an obvious progress, theory proves that the glue head can only transfer 67% of the ink, while 33% of ink will remain on the surface glue head into the next cycle, the viscous ink, some residual ink will re-enter the ink link, and part to remain in the rubber surface hinder the transfer of ink, in the first period of aging, the phenomenon is more serious, the cleaning device can will remain on the surface of the rubber head, 93% of ink wash, reduces the impact of a print link.
Over Six Colors Pad Printer,Over Six Colors Large Pad Printer,Over Six Colors Ink Well Pad Printer
KC Printing Machine (Group) Limited , https://www.kcautopm.com