In the home decoration, how to choose the wooden floor is a headache. Here are some ways to choose the wooden floor.
First, it is best to choose wooden flooring in a large store, because the supply is sufficient and the quality is reliable.
Second, some people think that the wider the wooden floor, the better. In fact, this is not the case. Generally, the wider the wooden floor, the longer the deformation will be. The specific standard is 1.2 meters in length and 12 cm in width.
Third, the wood grain of the wooden floor is also very important. Generally, the straight wood grain is selected, and the pattern is minimized, except for customers who like this style. Because the deformation coefficient of the wooden floor and the straight line of the pattern is not the same, if they are laid together, the mutual influence is greater.
Fourth, the selection of hardness is also very important. You can use your fingers to draw when you choose. If the mark is deep, the quality is not high, so choose harder wood.
Fifth, when selecting, pay attention to the flatness of the floor, so that it can be reduced by laying it.
Sixth, try to pick a floor with a small color difference. The floor with large color difference is laid in a hidden place, and the place with small color difference is placed in an obvious place, so the effect is very good. (Ma Xinyu)
In the face of many brands of laminate flooring products on the market, consumers do not have to dazzle, as long as the quality, color, environmental performance, and after-sales service, etc., can choose the floor that meets their needs.
1, wear resistance
This is an important indicator of the quality of laminate flooring. Objectively speaking, the higher the wear resistance number, the longer the floor should be used, but the wear resistance value is not the only standard to measure the age of the floor. Under normal circumstances, the wear resistance of composite flooring reaches 10,000 rpm, and products with less than 10,000 rpm may have different degrees of wear after 1-3 years of use.
2, the expansion rate after water absorption
This indicator can be regarded as qualified within 3%. Otherwise, if the floor is exposed to moisture, or if the humidity is relatively high and the surrounding seal is not tight, deformation will occur, which will affect normal use.
3, formaldehyde content
This is a key indicator of whether the product we choose is harmful to the body, but it is easily overlooked by consumers. According to European standards, the formaldehyde content per 100 grams of floor should not exceed 9 milligrams, if more than 9 milligrams are unqualified products.
4, floor thickness
At present, the thickness of the floor on the market is generally 6 to 12 mm, and the thickness should be thicker when selected. The thicker the thickness, the longer the service life, but at the same time the actual needs of the family must be considered. The assembly effect can be assembled with the samples of the two floors to see if they are neat and rigorous after assembly. Floor Weight Floor weight is primarily determined by the density of the substrate. The substrate determines the stability of the floor, as well as the impact resistance and other indicators, so the better the substrate, the higher the density, the heavier the floor.
5. Formal certificate and inspection report
When consumers choose the floor, they must find out whether the business has relevant certificates and quality inspection reports. Relevant certificates generally include floor origin certificate, European Composite Flooring Association (EPLF) certificate, ISO9001 international quality certification, ISO14001 international environmental certification, and other related quality certificates.
6, environmental performance
A common concern for consumers is the environmental performance of the floor. The first consideration when choosing a floor is the environmental friendliness of the product, followed by the other properties of the product, as well as the price. You can check whether the floor is an environmentally friendly product by checking whether there is a relevant green certificate.
7, after sales service
Laminate flooring generally requires professional installers to use special tools for installation, so consumers must ask if the merchant has a professional installation team, and can provide a formal warranty certificate and warranty card.
There are many styles and titles of wooden floors on the market, such as solid wood flooring, composite flooring, soft rubber flooring, seamless flooring, suspended flooring, and waterproof composite flooring.
Solid wood flooring: The biggest advantage lies in the natural wood grain, texture, giving a warm feeling, easy to match all kinds of furniture decoration, plus many commercial houses are also popular when selling wood flooring, solid wood flooring becomes the mainstream of ground decoration materials Others are only trying to develop in the direction of imitating solid wood. The weakness of solid wood flooring is the poor durability to moisture and sunlight. Moisture causes natural wood to swell, while dryness shrinks, causing seams to even bend and swell.
Laminate flooring: Also known as imitation wood flooring, the surface layer is a laminate of rubberized paper and other materials combined with high temperature and high pressure. The middle layer and the ground layer are fiberboard several bagasse boards. Because the face paper can be dyed in different colors, it can imitate a variety of wood grain, and its plasticity is very high, so it is also very popular in the market. The advantages of composite flooring are high hardness, anti-wear, anti-fouling, flame retardant, waterproof and easy to care; the lack of appearance and texture is always different from natural wood flooring, and the degree of wet water will appear after breaking through certain waterproof lines. Permanent expansion, the appearance becomes undulating.
Soft rubber floor: Also known as floor glue, it is more imitation than composite floor. In addition to wood grain, it can also shape marble, floor tiles, mosaic and other features, and it is more and more fine, texture and color can be messy. The rubber floor feels soft and comfortable, and it is waterproof, sound-absorbing, anti-fouling, elastic, and not afraid of withstanding pressure. It can avoid leaving the traces of furniture heavy pressure and the originality of the shape. However, the commercial taste of the rubber floor is relatively strong, and it is generally believed that the texture is always inferior to the natural floor, and the seam is more difficult to handle, the feeling is lower, and the chance of being used as the main floor material for the home is low.
Pre-treatment of the floor: It means that each piece of wood flooring has been pre-painted with varnish before it is laid, which not only reduces the waxing effort after paving, but also reduces the sale of wood chips, while the wood interface is treated with flat beveled edges. Flat edge treatment is not easy to hide dirt, but it is flawed on the uneven platform; the oblique edge treatment is more expensive, it is easy to hide the ground concave problem on the line of sight, making the seam difficult to clean.
Seamless floor: It means that the surface of the floor is seamless and seamless, it can be waterproof to some extent, and it can be dustproof. The construction method is to first lay the wooden floor on the ground, then smooth it with a sanding machine, and then apply the varnish three to five times. The surrounding area is compacted with a corner line, and finally polished and polished. However, the wood of this method needs to be dried to avoid expansion and contraction in the future. The surrounding area should also be reserved for expansion joints. The bottom should be waterproofed so that the ground water can be re-infiltrated, and the construction should not be sloppy. Otherwise, the cracking will be lifted. Completely waste.
Suspended floor: It is a mounting method that relies on clamping. When paving, it can be paved on the original floor. Just add a layer of foam pad to absorb sound, avoid snoring and moisture infiltrating into the wooden floor. There are two ways to pave the way: First, use the nail and glue to join the wooden floor and the sub floor. Second, the bonding of the wooden floor itself is placed on the sub-floor, and they are not bonded to each other, so that they are suspended. The suspended floor can be placed on any floor covering.
In the international market, solid wood flooring products represented by three-layer and multi-layer solid wood composite flooring are collectively referred to as: ENGNEER WOOD FLOORING, which means solid wood flooring after industrial processing. These products scientifically avoid the problems in the use of traditional solid wood flooring, showing a longer life, more features, and richer surface style features.
1. The perfect combination of large-scale industrial production and style-specific craftsmanship. Whether it is three-layer solid wood flooring or multi-layer solid wood flooring, the intertwined product structure overcomes the deformation caused by wood anisotropy. Large-scale industrial production makes such a structure possible. Compared with traditional solid wood flooring, the three-layer and multi-layer composite floor structure can overcome more than 80% of physical deformation.
2. Industrial wood pretreatment process. The pre-treatment of large-scale wood includes anti-corrosion treatment, stress balance treatment, insect control, flame retardant, antibacterial treatment, etc. These industrialized large-scale wood treatment processes make the unique product structure of solid wood composite flooring quite easy to implement.
3. Large-scale industrial production has greatly improved the processing accuracy and stability of products. Industrial production can make the processing precision of the floor reach the micron level, and the product combination precision determines the appearance, sealing and moisture proof of the product.
4. Feeling more comfortable. In fact, the feeling of the foot comes from the texture of the wood material selected by the product. The wood species most suitable for the surface material may be very hard, cool and uncomfortable. The three-layer, multi-layer solid wood floor surface and the middle layer are different. The material can achieve a high degree of uniformity in surface decoration and use comfort.
5. Installation is easier. The three-layer and multi-layer solid wood flooring is suitable for non-keel installation. In fact, the keel solves the problem of leveling, which is used to compensate for the problem of product processing accuracy. The improvement of the foot feel is actually a misunderstanding of the consumption of solid wood flooring. With the popularity of geothermal heating, The advantages of three-layer and multi-layer solid wood flooring installed in non-keel are greatly reflected in product stability, processing precision and good thermal conductivity. Statistics show that quite a number of floor complaints are caused by improper installation of the keel.
6. Rich surface decoration style features. Due to the different wood cutting methods on the surface of the three-layer and multi-layer solid wood composite flooring, different decorative effects can be produced, and different splicing methods produce differentiated features, which provides a rich space for the shaping of the product style.
7. Higher cost advantage. Due to the high yield, the solid wood laminate flooring and the traditional solid wood flooring of the same surface material have considerable cost advantages. At the same time, it makes positive contributions to the sustainable development and comprehensive utilization of resources.
Three-layer solid wood composite floor lock technology leads technology
The three-layer floor with lock structure with real intellectual property rights is the frontier of science and technology in the domestic and foreign markets. At present, the lock structure is still in the scope of international intellectual property protection. The production of qualified three-layer solid wood lock system is technology, equipment and technology. The crystallization of the intellectual property system, the lock can bring higher stability, longevity and beauty to the product, which is the core value point of the three-layer solid wood floor.
The unique (ie, single-piece product) has become a new bright spot for the appreciation of surface value, forming a new surface value system.
The demand for solid wood multi-layer flooring is gradually increasing
Stability is the basic point of quality of solid wood multi-layer flooring. It is suitable for geothermal heating and non-keel paving. It is an objective demand of the market.
The hand-treated style differentiated feature floor has become the main direction of the value-added of solid wood multi-layer flooring. The consumption of solid wood flooring is stylized to meet the individualized lifestyle. The combination of hand-crafted surface and large-scale mechanized production is a new symbol of quality, stylization and functionalization of multi-layer solid wood flooring.
Para cord
Military spec 550 cords constructed of 100% nylon with 7 strand high strength core covered by a polyester smooth jacket yielding a minimum tensile strength of 550 pounds. Braided sheath has a high number of interwoven strands for its size, giving it a relatively smooth texture. It is available in assorted colors and all have white core strands. These smaller cords can be used in a wide range of applications from tie-down straps to braided bracelets and any other non-life-safety applications.
Feature:
• Soft-hand feel
• Good stretch and versatility
•Seven strand Hi - tensile cord is rated at 550 lb
• Ideal rope for outdoor utility applications
Description of Para cord
1. Name: Para cord 550 Parachute Cord Lanyard Rope
2. Material: PP (Polypropylene), Polyester, Nylon
3. Over 100 colors for your choice.
4. Length: 50ft, 100 feet is standard packing.
5. Most popular: 4mm, 7 inner strands, 3 ply twisted line, strength 550LBS
6. Packing: Coil, Hank, Bundle, Reel, Shell Color Bag
7. Diameter Range: 2mm-32mm
8. Structure: 8-Strand, 16-Strand, 24-Strand, 32-Strand, 48-Stran
If you have any questions, pls send email to us directly.
Para Cord,Paracord Rope,Rope Bracelet,Parachute Rope
ROPENET GROUP CO.,LTD , https://www.cordnet.com