1. Problem: The tape cannot be cut off.
the reason:
1 blade is not sharp enough;
2 The tip is blocked by adhesive.
Solution: Replace the blade or clean the blade.
2, the problem: tailing tape cut off.
the reason:
1 blade is not sharp enough;
2 block on the knife block;
3 The tension spring is too loose.
Solution: Check if the screws on the tool holder are too loose and lubricate it if necessary.
 3, the problem: adhesive tape can not be completely bonded box.
the reason:
1 The main spring is too loose;
2 The viscose deposit on the roller shaft does not work properly;
3 The tape failed.
Solution: Tighten the main springs, lubricate these drum shafts, and replace the tapes.
 4, the problem: the box was stuck in the middle.
the reason:
The tape wheel adjustment nut is too tight;
The height of the box was adjusted unreasonably;
The active spring is too tight.
Solution: Relax the tape wheel adjustment nut, readjust the height, and release the main spring.
 5. Problem: The tape is broken during the sealing process.
Cause: The blade sticks out too long.
Solution: Adjust the blade position.
Automatic baler http://
Semi-automatic baler http://
Sealing machine http://
Sealing machine concept
    Sealing machine is used to automatically seal carton sealing tape, economical and easy to adjust, can be completed at the same time, the upper and lower sealing action, you can also use printing tape, but also improve product image, is the first choice for automated packaging companies. The key component of the sealing machine is the drive motor. The greater the motor power, the better. Side belt drive for narrower cartons; upper and lower belt drives for higher cartons.
The use of sealing machine
    Applicable to household appliances, textiles, food, daily necessities, pharmaceuticals, light industry, chemical industry and other industries, product packaging, carton sealing, can be a separate sealing operation, can also be used with a baler supporting assembly line, is a standard The necessary equipment for packaging line operations.
Sealing machine common problems and reasons
CONTUO Electric Height Adjustable Desk includes five different series: Single Motor Sit Stand Desk, One Leg Sit Stand Desk, Two Legs Sit Stand Desk, Three Legs Sit Stand Desk, Four Legs Sit Stand Desk. CTT-D02 is our single motor sit stand desk, while CTT-01-C3 is a one leg Height Adjustable Desk with moving wheels. CTT-F01 (one leg sit-Standing Desk) can be used for business negotiations or as a dining table. CTT-L03 (3-legged sit stand office desk) is an L-shaped solution for managers and for some special office ambience settings. CTT-I03 is a sturdy meeting table that is also adjustable in height. CTT-BKB (face-to-face height Adjustable Desk) is an office workstation for two persons. We focus on sit stand desk for many years, and that's why we are becoming the leading manufacturer in this field.
Electric Height Adjustable Desk
Electric Height Adjustable Desk,Adjustable Height Desk,Electric Desk,Adjustable Office Desk
Shaoxing contuo Transmission Technology Co.,Ltd , https://www.contuodesk.com