Shanghai Bilang Biochemical Incubator has a two-way temperature control system for refrigeration and heating, with temperature controllable functions. The important test equipment of departmental laboratory is widely used in low temperature and constant temperature test, cultivation test, environmental test, etc. The controller circuit of the biochemical incubator is composed of a temperature sensor, a voltage comparator and a control execution circuit.
It is suitable for environmental protection, health and epidemic prevention, drug inspection, agricultural and livestock, aquatic products, universities, production departments, water analysis and BOD measurement, bacteria, mold, microorganism cultivation, preservation, plant cultivation, breeding experiments dedicated constant temperature equipment.
Shanghai Bilang introduced the safe operation precautions of the incubator as follows: The biochemical incubator should be installed in a place with small temperature and humidity changes as much as possible. Use a three-pin plug? The socket should be properly grounded. Before starting the biochemical incubator, you should be fully familiar with and understand the instructions of the supporting instruments and meters, and master the correct use methods. It is strictly forbidden to contain volatile chemical solvents? Explosive and flammable gases are placed in the box. Do not use flammable sprays near the incubator? To avoid ignition by electric sparks, always check the air path for leaks.
The biochemical incubator has a power-off protection function, so it will take about one and a half minutes to restart the compressor after it is stopped, so as to better protect the compressor. The distance between the condenser and the wall of the biochemical incubator should be greater than 100mm. There should be a 50mm gap on the side and at least 300mm space on the top of the box to ensure good heat dissipation. When carrying, repairing, and maintaining the biochemical incubator, avoid collision and shaking, and the maximum inclination should be less than 45 degrees.
When you stop using it for a long time, you should turn off the main power and the power switch at the rear of the device. At the same time, when the biochemical incubator is working, avoid opening the door frequently to keep the temperature stable, and at the same time prevent dust and dirt from entering the working room. The inside and outside of the box should be kept clean every day. It should be cleaned after each use. If it is not used for a long time, it is necessary to wipe the tank liner and equipment surface frequently to keep it clean and increase the transparency of the glass. Do not wipe the outer surface with acid, alkali or other corrosive solutions.
After the cultivation is completed, turn off the power switch. If you do not take out the experimental samples immediately, please do not open the door. The biochemical incubator should not be used in abnormal environments such as high voltage, high current, and strong magnetic field, and strictly follow the electrical safety operation rules.
Face Mask Machine,Breathing Mask Parts,Mask Machine Parts,Fixing Face Mask
Dunhua Office Equipment Co., Ltd. , https://www.dunhuaparts.com