Equipment introduction
80-300 crushing fineness, fast crushing speed, wide use range, simple operation, the whole machine weighs only 14 kg and can be used anywhere.
1. The principle of high-speed impact in a small space and the precision continuous air separation mechanism can make the crushing particle size average above 150 mesh, and the highest can reach more than 300 mesh. It is one of the few small crushers that can produce effective output and the fineness reaches the fine powder level Youpin machine.
2. The crushing speed is fast. On the premise of ensuring the fineness, such as pearls can be crushed 3Kg per hour. The easily crushable medicinal materials can reach 4Kg per hour, and the viscous material is about 2Kg / h.
3. Straight knife, small machete, and large machete can be formulated with a variety of knife types, which can effectively reduce the factors of unfavorable crushing caused by the difference in the nature of the material itself. Can be crushed to very fine particle size.
4. The operation is simple, no sieving is required, there are very few remaining materials after crushing, and the cleaning is convenient.
5. Humanized design, with overload and wrong switch protection device, worry-free operation.
6. It can be used continuously and has a powerful air-cooling device, so there is no restriction on the use time.
It is portable and the whole machine weighs only 14 kg and can be used anywhere.
Scope of application A wide range of applications, minerals, fibers and slightly viscous materials can be crushed to a very fine particle size, the material can be crushed into 80-300 mesh ultrafine powder.
Features
1. The ultra-fine crusher for FDV experiment is the only desktop type high-fineness crusher, the whole machine weighs only 14kg, and the crushing fineness of most materials exceeds 300 mesh;
2. The only crusher with ultra-high-speed motor (22000 rpm) that can run continuously;
3. The crushing speed is 1-4kg / h;
4. The straight knife, small machete, and large machete can be formulated with a variety of knife types, which can effectively reduce the factors of unfavorable crushing caused by the difference in the nature of the material itself, so it is widely used.
Model parameter volume: 360 * 360 * 580mm
Net weight: 14KG
Voltage: 220V
Power: 1800w
Speed: 22000r / min
Fineness: 80-300 mesh (common fibrous materials) 150-1000 mesh (brittle and hard materials)
Output: 1-4kg / h
Hinge,High Quality Hinge,Hinge Details, Sunzhengde Hardware Mfg Co., Ltd.
Sunzhengde Hardware Mfg Co., Ltd. , https://www.sunzhengde.com