[China] net current consumer wardrobe fitting for wardrobe selection in three ways: to buy the finished product, business custom, decoration company site built. The choice is more on-site, but now the custom-made wardrobes are slowly becoming popular, and the purchase of finished products has been relatively small. I will not mention the advantages and disadvantages, and the Internet is also spread, talk about some misunderstandings about the on-site creation and merchant customization.
1. Many owners have a strange deviation in the perception of building a wardrobe. They think that the carpentry masters built the wardrobe as if it were a few decades ago, bombing the ink line, smashing the plane, holding the hacksaw, and stabbing it. Then take a hammer and smash the nails, then the wardrobe will be assembled; and the business is customized, that is high-tech, throw the board into the machine, and then there will be a brand new wardrobe. Technology is productivity. It must be the more advanced, the better, the wardrobe is not like dumplings, the manual is better than the machine, the wardrobe is still believed to be the machine.
The fundamental difference between the current woodworking site and the factory-made wardrobe is the Plate . Different plates lead to different processes, and the tools are all manual. The woodworker may make mistakes when the material is opened. The factory's material-cutting master is the same. Possibly, the woodworker may have a wrong positioning position. The factory's driller may be in the wrong position. The current factory is far from the pure mechanical assembly line operation. The real decisive factor is the manual, but the factory is the carpentry master. The work is broken down into several steps, and then several people work together, no more advanced than the woodworker. Of course, technology is advancing, the machinery of the factory is becoming more and more advanced, and the possibility of artificial errors is becoming less and less. For example, Germany’s Haomai, etc., their production equipment has increased the operation of the computer, reducing manual mistakes, which is bound to be stronger than manual creation. .
2, many people think that the woodworker is hand-operated, the quality of the cabinet depends entirely on the craftsmanship of the carpenter sent to your home by the decoration company. Good luck, quality, bad luck, tragedy. Most people feel that their luck is not good enough, so they believe in the machinery of the factory and feel that the quality of the machine is definitely more reliable.
Woodworking work is a very important part of the decoration, and it is not like hydropower. It can't be seen after the ugly seals, but the woodwork is really to be displayed. The decoration effect depends mainly on light and color. As well as woodworking, woodworking, the decoration effect is greatly reduced, so the general decoration company is very tight on the woodworking, as the hydropower operation, the requirements are very high. As long as you are looking for a formal decoration company, your cabinet will not have any problems.
Look at the factory production, as mentioned above, although the factory is a large-scale machinery production, but the decisive role is still labor, and the process of producing a custom wardrobe in the factory is divided into: measuring tape, design, unpacking, production, packaging, Transportation, installation and other steps, each step is a group of people responsible, once a problem occurs in a certain process, the cabinet must be re-applied. The production cycle of the custom closet is also clear, and if you can't do it, you can't make a wardrobe in half a year.
Is it easier to train a carpenter, or is it easier to train a large group of people? When the real smart machine is not popular, I would rather believe in the craftsmanship of a carpenter than to believe in the crafts of a group of people. So, if you really like the beautiful shape of a custom closet, be sure to find a large-scale business with your own factory, be sure to check it out at the factory.
3, environmental protection issues, this is also a lot of people helpless, can not find things that are both environmentally friendly and durable, and can only be pulled up in the dwarf, compare the on-site construction and factory production which is more environmentally friendly. The problem arises again. The board built on the site should be more environmentally friendly, but after painting, it should be painted or affixed with furniture. The plate made by the factory is usually a particle board. It is glued with glue. The environmental protection type is almost innate, but it does not need to be used. Paint and paste the furniture treasure, how to choose?
This is a natural tangled proposition, as if the cabinets that cut trees are allergic to people, there is no material that is absolutely suitable for everyone, at least at the current level of technology.
The name of the plate is too much. In general, it can be divided into two categories. One is to cut the solid wood and then combine it into a large plate by different methods. The other is to make the solid wood into granules, and then glue them through high temperature and high pressure. Made. The glue used for particle bonding is bound to use more glue than the wood block. Therefore, from the innate side, the environmental performance of the particle board is worse than that of the wood core board, even if the glue used is highly environmentally friendly. A glue is more and a glue is less, which is the decisive factor. But after you make it, you need to paint or furniture treasure, and you will lose your advantage in an instant. If you are more environmentally friendly and confused, then use numbers to explain.
Environmental protection level certification, when you can't use the nose to distinguish the environmental protection of the two types of plates, who needs better professional technical institutions to help us distinguish them. They use professional machines and professional knowledge to help us detect the content of harmful substances. And the amount of volatilization, divided into E0, E1, E2, etc., reaching the E1 level is environmentally friendly, but people have found that even if the material of the E0 grade is selected, there is still a heavier pungent smell, which is the reason. What?
Because the material to be inspected is the core! And the factory materials have been reworked! Do you understand? The manufacturer's inspection is the core of the plate, just like the veneer, the core is sent for inspection, and there is no veneer, but want If the plate looks good, you must add other things outside the core. Adding these things is done in some chemical materials! These chemical materials will volatilize formaldehyde! This is why you buy E0 grade plates, but still taste the same!
In fact, we don't have to worry too much about environmental protection certification. To put it bluntly, that is the gimmick of the business. Do not deny that the better the environmental protection level, the less harmful to people, but that point of formaldehyde is really nothing, keep the airy E1 wardrobe more environmentally friendly than the sealed E0 wardrobe is more than a hundred times!
Therefore, for the choice of sheet, I think, do not have to entangle E0 or E1 too much, the economic conditions allow of course E0 level is good, but E1 level is not too worried, keep ventilation, your health is no problem.
Porcelain Dinner Plate, Side Plate, Dessert Plate, Salad Plate, Appetizer Plate, Restaurant Plate , Cake Plate, Serving Dish ,Kitchen Dish , Soup And Sandwich Plate , White Plate , Plates Set , Dish Sets
Dishwasher and microwave safe, durable and easy to care for, With CIQ,
SGS, CIQ and LFGB certificate
Welcome OEM and accept your own band and design.
Round, coupe, square ,irregular shape , We can make different combination of Dinnerware Sets as your requirement.Such as oval dish,serving plate.
Coffee set / Tea Set can be in different packing: bulk packing, gift color box, Mail Box, PDQ, Pallet packing, IKEA packing.
Payment terms: T/T or L/C
Delivery date: 45 days
Accept OEM and your own brand and design
Samples are available.
MOQ: 1000 pieces for bulk item, gift sets is 600 sets
Mixed order is accepted.
Any more question, please contact our customer service.
Dinner Plate, Side Plate, Dessert Plate,Porcelain Plate
Shenzhen Good-Always Imp.& Exp.Co.Ltd , https://www.good-always.com