The first purchase of the Yashilin high and low temperature test chamber, Yashilin's commissioners are all installed and commissioned. If you move the company and it is not convenient for the commissioner to come to the door, you can install the high and low temperature test chamber as follows:
First, determine the installation location of the test box. The equipment should be placed in a place with smooth ground, good ventilation, no strong vibration, no strong electromagnetic field, no flammable, explosive, corrosive substances and dust.
Second, to ensure the environmental conditions of installation and resettlement. Ambient temperature: 5 ° C ~ +30 ° C (average temperature within 24 hours ≤ 30 ° C) Ambient humidity: ≤ 85% RH
Third, connect the power cord. Power requirements: AC380V±10% 50±0.5Hz Three-phase five-wire system; users are required to configure the air or power switch of the corresponding capacity at the installation site, and this switch must be used independently for this device.
Fourth, start moving high and low temperature test chambers. The equipment itself is equipped with a universal caster. If the equipment is placed directly on the same floor, it can be directly pushed forward. If the test box is placed upstairs, downstairs or other locations, it should be considered whether there is an elevator, the width and height of the elevator. The aisles, corridors, and doors that need to pass through the laboratory can be smoothly entered. If there is no elevator to be manually transported, care should be taken.
Isolation Clothing,Cpe Isolation Gown,Cpe Disposable Gown,Disposable Protective Gowns
Jinzhou City Hejin Clothing CO.,Ltd , https://www.hejin-cloth.com