Bag and plastic bag use and its various functions

Bag making is the semi-finished product that will be completed by the printing and will be heat-sealed on the machine and cut into bags. This is done through a special bag making machine. Since there are several ways to make bags, including bottom seals, side seals, and three-side seals, there are different machines for different kinds of bags.
In terms of sealing, technicians must adjust the size (length) and seal fastness according to the width, width, and thickness of the bag.
Laminator This is a requirement for the production of foam EPE bags. Its function is to strengthen the strength of EPE bags, as well as the printing requirements, but also need to use the method of re-filming to solve the problem of poor printing on EPE bags. When filming, the EPE and the film to be reconstituted are passed through a heated roller, and the two are pressed together and heated together. The requirements are that they are not deformed or do not fall off as a quality certification standard.
The main products: anti-static shielding bags, anti-static moisture-proof aluminum foil bags, conductive bubble bags, mesh bags, anti-static PE bags, EPE pearl cotton bags, bubble bags, ziplock bags, mesh bubble bags, adhesive protective film

Anti-static shielding bag (physical properties): thickness: 3.1MIL
Thickness: 3.1 MIL
Moisture Transmission Rate (MVTR):
<0.3gms ASTMF-1249
Water vapor transmission rate: <0.3gms ASTMF-1249
Electrical performance:
EMI Shielding>10dB(1-10GHz)
Magnetic dry shield: >10dB (1-10GHz)
Surface resistance: <=1010Ω
Conductive metal impedance: <=102Ω
Static decay time: <(0.01 second)

Anti-static moisture-proof aluminum foil bag (thickness): 3.6 MILASTMD-2103
Thickness: 3.6 MILASTMD-2103
Moisture Transmission Rate (MVTR):
<0.02gms ASTMF-1249
Water vapor transmission rate: <0.02gms ASTMF-1249
OTR: <0.05CC ASTMF-3985
Electrical performance:
EMI Shielding>40dB(1-10GHz)
Magnetic dry shield: >40dB(1-10GHz)
Surface resistivity<1010 ohm/sq (D257)
Surface resistance: <1010 ohm/sq (D257)

Conductive air bubble bag (low density polyethylene, with long-lasting antistatic effect, provides reliable protection for printed circuit board assembly and transportation, soft air bubble effectively relieves the external environment's vibration, technical indicators conform to MIL-81705B, surface resistance <10 static discharge time <0.1seconds, can be made of single-sided bubble film and double-sided, mesh bag (the outer layer of mesh bag is low-density printed conductive mesh, which provides reliable electrostatic protection for the circuit board to avoid damage) Anti-static PE bag (High-bottom-density polyethylene with long-lasting anti-static effect, technical specifications in accordance with MIL-B-81705B, surface resistance <10Ω, electrostatic discharge time <0.1seconds, color: blue, green, pink and transparent.
EPE Pearl Cotton Bag (EPE Pearl Cotton Bag: His original material is also LDPE Polyethylene because HDPE does not foam up; so it is not suitable for making EPE Pearl Cotton Bags, PE high foaming products, with soft protective effect, suitable for computers, cameras Topcoat protection for high-value items such as TVs, refrigerators, etc.).
Adhesive PE protective film (according to the material, to produce a suitable film of corruption, no residue after tearing, use in plastic parts, hardware, injection molded parts and other mirror protection.