Beijing Incofan Chemical Products Co., Ltd. launched WE type plastic film gravure water-based ink

A kind of water-based ink for plastic film gravure printing - WE type plastic film gravure water-based ink has been successfully developed by Beijing Incofan Chemical Products Co., Ltd. This product makes up for the inadequacies of similar domestic products in printability, etc. In the field of domestic plastic film gravure printing, there is a product that can fully meet the required standards. At present, the product has been mass-produced and put on the market. It is estimated that the sales volume in 2006 will reach 1000-5000 tons.

The printing effect and performance of this WE type plastic film gravure water-based ink can reach the level of similar products with aromatics as the main solvent, and the properties such as adhesion fastness, drying speed, color concentration and glossiness have reached the international advanced level of similar products. The product has good printing performance and adhesion fastness on plastic film such as BOPP, PE, concave T, etc. with a surface tension of 36 dyne/cm 42 dyne/cm. When used in BOPP film printing, Printing speed up to 70m/min, rubbing fastness to 100% without peeling after 24 hours scraping, peeling fastness to 100% without peeling, ink film in 1:1 hydroalcoholic solution or 1% NaOH alkaline solution Soaking for more than 2 hours can still remain intact.

Source of information: pack.cn

RC Insect

BELLMAY TOY CO., LTD. , http://www.bellmaytoys.com

Posted on